Museum display case low reflection glass recommended installation operation process!

Museum display case low reflection glass recommended installation operation process! The low-reflection glass of the museum display case is made of a tough plastic inner layer that pastes two pieces of glass at a certain temperature and pressure, and the thickness of the sandwich pc is generally 0.5mm-5mm. Also known as museum display case low-reflective glass, its plastic inner layer can absorb the impact and part of the energy and shock wave pressure generated during the process, even if it is shattered, it will not splash. With good security, impact resistance, and penetration resistance, with anti-theft, bulletproof, and explosion-proof functions. UV-printed glass is suitable for exterior wall decoration. Low-reflective glass is recommended for museum display cases.

Museum display case low reflection glass recommended, mirror nail fixing method, this fixing method is mostly used for frameless art glass background wall or thicker, heavier art glass background wall. The height and length of a single piece of glass is limited to one meter and five meters, beyond which three mirror nail holes need to be drilled in three equal parts in advance. If it does not exceed 1.5 meters, drill two mirror nail holes in advance. When fixing, drill holes in the backboard or wall in advance at the designated position of the mirror nail holes. Put in the expansion tube. Then the glass on the wall is fixed with mirror screws. This fixing method is more beautiful. Large bearing capacity suitable for large areas and thickness of art glass background wall fixed.

Adhesive and mirror nails, fixed in combination with this method are less used. Under normal circumstances, unless it is overweight ultra-thick glass alone, one of the methods can solve the problem. When in use, the order of punching holes in the back plate and placing the expansion tube, then gluing the glass and then fixing the mirror screws. To prevent displacement, it can also be used to assist in fixing using top pressure.

The above four are commonly used art glass background wall fixing methods. I hope that when you are decorating your home, you can choose a reasonable background wall-fixing method according to your actual situation. Hangzhou CSG Glass Technology Co., Ltd. specializes in the production and processing of all kinds of art glass and art background wall glass manufacturers Museum display case low reflection glass manufacturers screen printing glass processing technology is what?

AR glass and museum display case low-reflection glass although the name is only a letter difference, but they are two completely different kinds of glass, AR glass is also called museum display case low-reflection glass, the production principle of this product is to use the international more advanced magnetron sputtering coating technology in ordinary reinforced glass surface coated with a layer of anti-reflection film, Effectively reduce the reflection of the glass itself, increase the transmittance of the glass, and make the original color through the glass more vivid and more real. Museum display case low reflection glass also called anti-glare glass, is a special treatment of the glass surface. The principle is to process the quality glass on one side or two sides, so that it has a lower reflection ratio compared with ordinary glass, thereby reducing the interference of ambient light, improving the clarity of the picture, reducing the screen reflection, making the image clearer and more realistic so that the viewer can enjoy a better visual effect.

Installation and operation process of low-reflection glass in museum display cases

1) Process flow, glass selection and cutting → separate specifications → Wipe before installation → inlay glass → press wire and make glass glue

2) Glass selection and cutting: the glass that needs to be installed is divided into specifications and quantities according to the parts, and the cut glass is placed according to the specifications; The amount of distribution should be based on the number of installations on the day, and should not be too much to reduce handling and reduce the loss of glass.

3) Embedded glass: After the glass is flattened and compacted, nail the four sides respectively, tap the glass with your hand after the nail is finished, and the sound is solid, indicating that the glass is installed smoothly; If the sound is pitter-patter, the glass should be removed again, and the glass should be put on after the basic treatment is qualified.

4) The installation of colored glass and embossed glass, should be carefully cut according to the design pattern, the joints must be consistent, do not allow dislocation loosening and oblique bending, and other defects.

5) When installing embossed glass or frosted glass, the flower surface of embossed glass should be outward, and the frosted surface of frosted glass should be indoors.

6) When installing a glass partition, the top surface of the partition frame should have an appropriate amount of gaps to prevent structural deformation and damage to the glass.

7) After the glass installation, it should be cleaned up, putty, nails, steel wire clips, and wood layering, and close the doors and Windows.

8) In winter, the construction should be in the room where the glass has been installed, and the temperature should be above the positive temperature; The temperature of the warehouse where the glass is stored and the working surface should not be too different. If the glass is transported into the operating site from an excessively cold or overheated environment, it should be installed after the glass temperature is close to the indoor temperature. If conditions permit, pre-cut glass should be transported to the work site in advance. Crystal glass is called artificial crystal.

Museum display case low-reflection glass recommended ultra-white dazzling laminated glass, belongs the museum display case low-reflection glass, is composed of two or several pieces of museum display case low-reflection glass plus film and dazzling film combination, and then through a series of processes such as laminated film, autoclave baking. Compared with the laminated glass made of ordinary glass, the museum display case low-reflection glass is known as the "crystal prince" of the glass family, which has the characteristics of crystal clear and elegant. It is used to make laminated glass with the magical discoloration effect of the colorful film so that the whole product can change different colors at different angles and light to achieve a colorful scene.

Suitable for architectural decoration, art exterior walls, famous shop props, and other fields, its super white laminated glass color is smart and simple but not simple, providing a decorative appearance, and the visual effect is better. Super white dazzling laminated glass, a museum display case low reflection glass, is made of two or several pieces of museum display case low reflection glass plus film and dazzling film combination, and then through a series of processes such as laminated film, and autoclave baking. Hangzhou CSG Glass Technology Co., Ltd. provides customized non-reflective glass processing for the Beijing Garden Museum. Color-changing glass service

What are the product characteristics of low-reflection glass in museum display cases? The introduction of a new 100,000 dust-free laminated glass production workshop has been put into operation. Business products are imported and domestic museum display cases of low reflection glass and special glass products, its brands are museum display cases of low reflection glass, non-reflective glass, porcelain white glazed glass, Pilkington one-way transparent glass, provide more accurate cutting, edging, laminated, UV printing and other processing services; Commercial props, exhibition, and other fine glass.

Museum display case low reflection glass is a highly expressive decorative glass variety. The characteristics of paint glass: are water resistance, acid, and alkali resistance. The low-reflective glass of the museum display case uses environmentally friendly paint, which is healthy and safe. Strong adhesion, not easy to fall off. Excellent anti-slip performance. UV resistance, strong anti-color aging. Color selection is strong. Strong weather resistance and strong compatibility with structural adhesive. Strong stain resistance, easy to clean. Low-reflection glass is used in glass countertops, glass image walls, glass background walls, glass fences, cladding panels, private Spaces, and store interior and exterior space design.